Ac 7000 oil pressure gauge
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172759
Printed Date: 28 Oct 2025 at 12:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ac 7000 oil pressure gauge
Posted By: Bassguide
Subject: Ac 7000 oil pressure gauge
Date Posted: 13 Jul 2020 at 6:36am
| Hello all, just joined the site. Recently acquired a 7000 maroon belly and would like to install an oil pressure gauge. Any idea on where to tap into the system? Thanks ahead for your knowledge. |
Replies:
Posted By: Alvin M
Date Posted: 13 Jul 2020 at 9:14am
| Right Side Of Black Where The Sender Is Use A Tee Fitting And Hook Up There |
Posted By: AC720Man
Date Posted: 13 Jul 2020 at 12:47pm
 Should be the same as a my 190XT ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 13 Jul 2020 at 12:48pm
|
Sorry for the sideways picture, oil filter removed so you can see ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Bassguide
Date Posted: 13 Jul 2020 at 1:42pm
| Good spot not so easy for me...thanks |
Posted By: DougG
Date Posted: 13 Jul 2020 at 5:40pm
| ALWAYS use a copper line from T - to gauge , never use the plastic ones they send |