Woodruff Key for AC 190xt Steering Arm
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172164
Printed Date: 28 Sep 2024 at 9:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Woodruff Key for AC 190xt Steering Arm
Posted By: whizone
Subject: Woodruff Key for AC 190xt Steering Arm
Date Posted: 19 Jun 2020 at 3:45pm
| Can anyone tell what size or where I can procure a steering arm woodruff key for a AC 190xt steering arm? I cant seem to find one anywhere.. Thx. |
Replies:
Posted By: steve(ill)
Date Posted: 19 Jun 2020 at 3:55pm
|
i would think the local hardware store or farm store would have a box of generic keys... There are several sizes .... Allis did not use a non standard hardware item. ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 19 Jun 2020 at 3:56pm
|
When in a hurry ( no store) , i have taken something like a 1/4 inch key and grind it to 3/16 width to "FIT" the slot of the machine i am working on. ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 19 Jun 2020 at 4:01pm
McMaster Carr catalog --- to give you an idea of sizes ------------- Like them all, but love the "B"s. |
Posted By: Michael V (NM)
Date Posted: 19 Jun 2020 at 4:39pm
| if its like the one in a 220, the key will have little 'ears' on it,,, like $32.00 from agco |
Posted By: DrAllis
Date Posted: 19 Jun 2020 at 5:00pm
| They are a Hi-Pro key which is harder than the spindle or the arm. I have never seen one sheared. |
Posted By: DSeries4
Date Posted: 19 Jun 2020 at 10:35pm
|
The key was not the problem on my D21 spindle. The spindle itself wore out on either side of the key, so it would fold around depending which way the wheel turned. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DrAllis
Date Posted: 20 Jun 2020 at 6:21am
| EXACTLY !! the key is never the problem. |
Posted By: Alvin M
Date Posted: 20 Jun 2020 at 7:10am
| AGCO Part # 70923996 HI PRO Key Price Is 12.78 |
Posted By: whizone
Date Posted: 22 Jun 2020 at 8:04am
|
Thanks much Alvin. Now the spindle arm can go back on! keep on ACing.. |