301k engine stator wires
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171607
Printed Date: 30 Nov 2024 at 7:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 301k engine stator wires
Posted By: nickia
Subject: 301k engine stator wires
Date Posted: 29 May 2020 at 4:55pm
|
I'm replacing my 12 hp Kohler engine I have an extra wire coming from behind the fly wheel or should say from the stater and a wire from the voltage rectifier. Any ideas where to tie these wires into the system? Thanks |
Replies:
Posted By: steve(ill)
Date Posted: 29 May 2020 at 9:04pm
typically there are two wires from the stator - alternator ( normally white) that go to the rectifier that changes the AC current to a DC voltage output...... Then you have a module for the spark.... ?? ------------- Like them all, but love the "B"s. |
Posted By: jaybmiller
Date Posted: 30 May 2020 at 6:11am
|
like Steve showsandtells... 2 wires from stator to rectifier/voltage regulator module. A picture would help me. I had 4 LGT125s, so same 12HP 301k engine.... jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |