Need measurement on a Subsoiler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171449
Printed Date: 27 Apr 2024 at 2:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need measurement on a Subsoiler
Posted By: Larry Miller
Subject: Need measurement on a Subsoiler
Date Posted: 24 May 2020 at 7:02pm
|
I need the length of the lift link on a subsoiler. I guess they are the same on various models? I have the early one w the curved shank. The lift link is the part between the eye on the SS to the lift latch on the lift arms of the tractor. Length from eye to rod that fits in the snap latch on the tractor please. Larry Miller ------------- I used to be young and stupid, now I am not young anymore. |
Replies:
Posted By: DiyDave
Date Posted: 24 May 2020 at 7:18pm
IIRR, they may be different, between a WD and a D series, which are you mounting it on?  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Larry Miller wrote:Posted By: Ed (Ont)
Date Posted: 24 May 2020 at 7:38pm
| Larry it is 18 in. From the outside of eye to crosspin that goes into snap coupler latch on my old subsoiler that sounds like the one you are describing. Outside of eye to start of threads is 13 1/2”. To center of crosspin. Pretty wet out there tonite. Lol. |
Posted By: Ed (Ont)
Date Posted: 24 May 2020 at 7:59pm
| So 18” from outside of eye to centre of crosspin. Trying to upload pic but can’t seem to do it. I have no idea what model tractor this was designed for. Just a used one I bought. Fits not too bad on the WD45 but point does drag just a bit with the lift in highest position. Hope that helps. Ed. |
Posted By: Larry Miller
Date Posted: 24 May 2020 at 8:09pm
|
I have a D 14 & a D 17 - mostly be on the 17 - thanks for the info guys. Miller ------------- I used to be young and stupid, now I am not young anymore. |
Posted By: Ed (Ont)
Date Posted: 24 May 2020 at 8:16pm
|
Posted By: Ed (Ont)
Date Posted: 24 May 2020 at 8:17pm
| There is the pic. 😀 |