Print Page | Close Window

WD serial number

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171410
Printed Date: 02 May 2024 at 7:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WD serial number
Posted By: WDmatt
Subject: WD serial number
Date Posted: 23 May 2020 at 4:34pm
I just bought a WD, and the serial number is 209286. I know I'm not reading it wrong, and the serial numbers ended at 131,273 in 1953. I'm almost 100% positive that the tractor is a WD, not a WD-45. How is my serial number possible?



Replies:
Posted By: Gary
Date Posted: 23 May 2020 at 6:07pm

It would seem that someone replaced the complete 'rear end assembly' with one from a WD-45.

Does it have a Curved Shifter ?

BTW where are you getting the Serial No. from on the tractor ?


Posted By: MACK
Date Posted: 23 May 2020 at 10:35pm
That # is a parts #.


Posted By: ac fleet
Date Posted: 24 May 2020 at 1:14pm
Serial # is located on left rear housing and is stamped in not cast in.---look again at your tractor!


-------------
http://machinebuildersnetwork.com/


Posted By: WDmatt
Date Posted: 25 May 2020 at 8:35pm
Yeah, it's stamped in, I just miswrote cast on my post. It does have a curved shifter


Posted By: DaveKamp
Date Posted: 25 May 2020 at 9:19pm
Matt... your engine... look at both sides of the block. Are both sides smooth, or does ONE side of the block have a large metal plate with lots of bolts holding it on?


-------------
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.


Posted By: Sugarmaker
Date Posted: 25 May 2020 at 9:35pm
I did not do the research to be able to help you with the serial number. But I will throw this in the mix. We have a WD that had the rear end changed and does not have the original number on the back. I am still kicking myself for not getting the original serial number off the casting we scraped!
Regards,
 Chris


-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.


Posted By: WDmatt
Date Posted: 26 May 2020 at 9:53am
Originally posted by DaveKamp DaveKamp wrote:

Matt... your engine... look at both sides of the block. Are both sides smooth, or does ONE side of the block have a large metal plate with lots of bolts holding it on?
The engine is a WD-45 engine. I'm starting to think that the tractor is a WD-45. My neighbor who I bought it from swears up and down that it is a WD. The hood has 2 WD decals on each side, from previous bad repaints. Maybe the hood was replaced? In not sure. Other than the serial number and plate on the right side of the engine, I don't know anymore differentiating characteristics.


Posted By: Ed (Ont)
Date Posted: 26 May 2020 at 10:30am
That would be a 1955 WD45 if all else is in agreement.


Posted By: DrAllis
Date Posted: 26 May 2020 at 11:07am
Engine serial number is behind the carb/air cleaner hose and would read 45-XXXXXX-G. If it is a WD engine it would read W-XXXXXX-G or P.  If there is no serial number, the block has been replaced one time in the past and no one ever stamped a s/n in it.


Posted By: ac fleet
Date Posted: 26 May 2020 at 3:37pm
one of my 45's came up as a 55 and the parts frame tractor came up a 56. 


-------------
http://machinebuildersnetwork.com/



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net