H3 Dozer
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170968
Printed Date: 02 May 2024 at 1:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: H3 Dozer
Posted By: Sgilles
Subject: H3 Dozer
Date Posted: 09 May 2020 at 4:06pm
| Hello all, new to the forum. I have recently acquired a h3 dozer that has the capability to be a power six way blade. Does anyone know where one could acquire the side to side tilt cylinder? Or an equally heavy replacement? Thanks in advance |
Replies:
Posted By: jaybmiller
Date Posted: 10 May 2020 at 6:05am
|
welcome, sniff ,sniff.. I always wanted an H3.... if you have the cylinder, a shop could rebuild it... may take a few days for an H3 owner to reply...might not be too many. try googling 'allis-chalmers H3 tilt cylinder specs' ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Sgilles
Date Posted: 10 May 2020 at 4:03pm
| Thanks for the welcome, the h3 didn’t come with the cylinders for power tilt and side to side blade adjustment. I was looking to acquire originals or find out the specs for the stroke on them similar could find replacement cylinders. |
Posted By: jaybmiller
Date Posted: 10 May 2020 at 4:35pm
|
Just have to wait a bit.... I assume the HD3 is the same setup as the H3, and lots of them around..... Someone will probably post a 'link' to a manual..... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: NomoreJohnDeere
Date Posted: 10 May 2020 at 10:33pm
|
No pics no link ------------- HD3 |
Posted By: Ages Cat
Date Posted: 11 May 2020 at 7:56am
|
You might try Summerix Implement in Lachine, MI. Speak to Ivan. ------------- Curt Anderson HD3, HD5B, HD6E, HD6AG,HD6B dozer, I-400, 615, 616,(2) 620, 720, ACP25 lift truck, 1956 D Special Grader, AC 540 loader, AC 655 crawler loader, AC #84 plow, Simplicity lawn tractors. |
Posted By: NomoreJohnDeere
Date Posted: 14 May 2020 at 8:59am
------------- HD3 |
Posted By: NomoreJohnDeere
Date Posted: 14 May 2020 at 9:01am
------------- HD3 |
Posted By: Coke-in-MN
Date Posted: 14 May 2020 at 10:03am
|
Surplus Center - has many hyd cylinders and you might find something to work . son has been buying cylinders from them for his skid loader attachments , but he just bought 2 cylinders off e-bay for a special puller he is building - his supplier he used last time said they were out of production - but he found 2 on e-bay $200 cheaper . After they were delivered the other supplier said they were back in stock but $100 higher than last order . So looks like a lot of suppliers are now competing for business - Other thing some hyd shops will build to order for 1 of use ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Hyperpack
Date Posted: 01 Jun 2020 at 1:14pm
|
I have an H3 for many years, If I were looking to add a cylinder there I would put slightly larger one on there. Mine is weak tilting on one direction on really hard ground with a loaded blade. Hyperpack
|
Posted By: Bret (OH)
Date Posted: 04 Jun 2020 at 5:47am
| might try Thill Track and Tractor in Eau Claire, WI. http://www.thilltractor.com/" rel="nofollow - http://www.thilltractor.com/ |