D12 wide front
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170334
Printed Date: 03 Oct 2025 at 6:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D12 wide front
Posted By: Marlyn nwia
Subject: D12 wide front
Date Posted: 20 Apr 2020 at 5:43pm
|
Does a wide front end from a D14 bolt right up to a D12 II? Are they the same weight? |
Replies:
Posted By: DiyDave
Date Posted: 20 Apr 2020 at 5:57pm
Not sure, I know, from experience, spindles are thicker, may be longer. May sit the tractor up higher, in front, I doubt the bolt-up theory, too...  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Marlyn nwia wrote:Posted By: PaulB
Date Posted: 20 Apr 2020 at 6:57pm
|
The short answer is NO. they are completely different axle assemblies. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |