Pipe fitting
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170266
Printed Date: 25 Jun 2024 at 1:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Pipe fitting
Posted By: Dusty MI
Subject: Pipe fitting
Date Posted: 18 Apr 2020 at 9:33pm
|
A little different question. I need to use a 1 x 1 x 1/2" Tee sweat solder copper fitting in a rather close/tight place, and would like to know what the over all length and hight measurements are, before I go and get one. After the Stay At Home is lifted. Thanks, Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Replies:
Posted By: Trawler II
Date Posted: 18 Apr 2020 at 10:20pm
|
Dusty MI wrote:Posted By: Trawler II
Date Posted: 18 Apr 2020 at 10:22pm
|
Might try Mueller Co. they make copper fittings. Should be able to see a cut sheet with takeoffs for this fitting. Look up Mueller Streamline on the web. |
Posted By: john(MI)
Date Posted: 18 Apr 2020 at 10:48pm
|
Might google to see if they make a sharks tooth fitting like you need. Quicker and easier. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: DiyDave
Date Posted: 19 Apr 2020 at 5:30am
I think its called a sharkbite, or pex fitting...
 ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: jaybmiller
Date Posted: 19 Apr 2020 at 5:58am
|
NIBCO is a huge mfr of them...yet I coulden't see real dimensions but I'm thinking 3.5" long and 2.25" tall. I'm thinking in the plumbing world nobody needs to use tape measures as they just cut the pipe to fit..... I know the road builders up near don't know what a tape measure is for !! I'd call NIBCO or someone who STOCKS the tee and ask them for real dimensions... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: plummerscarin
Date Posted: 19 Apr 2020 at 8:41am
|
Posted By: Dave H
Date Posted: 19 Apr 2020 at 8:47am
|
Lowes and Menards are wide open here in central IL |
Posted By: jaybmiller
Date Posted: 19 Apr 2020 at 8:49am
|
hmm 2 and 9/16" NOT 8 and 9/16....... it's actually shorter than I thought it would be.... I wass going to see if I had one, got sidetracked and plowed the Wife's garden in the pitter,patter..... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Dusty MI
Date Posted: 19 Apr 2020 at 11:23am
There are open here too, but we are under a Stay Home, and I'm try to get this project ready to do after Stay Home is lifted, and also to save a trip. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Dusty MI
Date Posted: 19 Apr 2020 at 11:27am
|
Thanks Plummerscarin. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Gary
Date Posted: 19 Apr 2020 at 3:22pm
|
Try this Chart, page 17 https://famco.ca/wp-content/uploads/2013/07/NIBCO-Copper-Fittings.pdf" rel="nofollow - https://famco.ca/wp-content/uploads/2013/07/NIBCO-Copper-Fittings.pdf |
Posted By: steve(ill)
Date Posted: 19 Apr 2020 at 4:34pm
|
Dusty, i was wondering about that.. STAY HOME order, but the Hardware store is open ? How does that work ? In Illinois we have a "stay home" unless you need essentials.. you can go to Menards or Wal Mart, etc. ------------- Like them all, but love the "B"s. |
Posted By: weiner
Date Posted: 19 Apr 2020 at 8:54pm
|
I think the idiot govenor here in Michigan is pushing her luck. ------------- Real heros wear dogtags, not capes. |
Posted By: plummerscarin
Date Posted: 19 Apr 2020 at 9:46pm
| Have relatives in OH,MN that can shop on line at big box stores and pick up at storefront |
Posted By: plummerscarin
Date Posted: 19 Apr 2020 at 9:49pm
|
Have relatives in OH,MN that can shop on line at big box stores and pick up at storefront BTW, I missed the part where was asking the height of fitting. 1 7/8" |
Posted By: fadouacommitment
Date Posted: 25 Jun 2022 at 7:53am
| Before that, I recommend you talk to a plumber anyway. He will give you a more correct and safer answer, so you will know why you need to buy and that you will not fail. http://https://www.howtobecomeaplumber.org/" rel="nofollow - A plumber has to be good at math and knows how to create and read blueprints , so I'm sure he'll give you the best advice and help. In general, you could also ask him about pipe fitting so as not to fail. It's worth asking for advice. I hope my recommendation was helpful to you. |
Posted By: jaybmiller
Date Posted: 25 Jun 2022 at 8:00am
|
SPAM SPAM SPAM ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Dusty MI
Date Posted: 25 Jun 2022 at 8:23am
Where ? It was long enough ago that I don't remember any of this or what I was doing, so I must have got it all done. This 80+ years and my memory is slipping. Thanks, Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |