Holes at base of D 15 rad grill
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170088
Printed Date: 02 May 2025 at 12:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Holes at base of D 15 rad grill
Posted By: ACinSC
Subject: Holes at base of D 15 rad grill
Date Posted: 13 Apr 2020 at 12:13pm
| Look like 1/2" threaded holes to me . Just wonder what these are for ? Suitcase weight bar ? Thanks ! |
Replies:
Posted By: Gary
Date Posted: 13 Apr 2020 at 12:23pm
|
Front hydraulic pump 'Guard' for Model 415 Hydraulic Loader. Gary ………………..…………………………………………………………….. I was thinking you were referring to the left and right Side Rails. Those same side holes are used to mount a Grille Guard. The 2 threaded holes in front and below the Grille are normally used to mount the Hydraulic Pump for the 400 Series Loader. |
Posted By: ACinSC
Date Posted: 13 Apr 2020 at 12:34pm
| Ok , Thanks Gary ! |
Posted By: DiyDave
Date Posted: 13 Apr 2020 at 5:43pm
Also, there was a weight that fit those 2 holes, too. Here's a picture of the one off a D-19, but the D-14/15 fit similarly... http://www.brianahart.net/d19front1.jpg" rel="nofollow - http://www.brianahart.net/d19front1.jpg ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Gatz in NE
Date Posted: 13 Apr 2020 at 6:06pm
|
weren't they also for a "crane" to use when mounting a cultivator on the side rails when there was a wide front end? It allowed the cultivator halves to swing around the front tires. Our D17 had a bracket that bolted towards the front of the side rails and bolted into the holes like those shown on the D15
|
Posted By: ACinSC
Date Posted: 13 Apr 2020 at 7:39pm
| Thanks guys !! |