Farm Equipment - 7060 AIR SEAT

Print Page | Close Window

7060 AIR SEAT

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170029
Printed Date: 23 Jun 2024 at 2:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 AIR SEAT

Posted By: SIMPLICITY
Subject: 7060 AIR SEAT
Date Posted: 11 Apr 2020 at 6:15am

ANYBODY EVER INSTALLED A GRAMMER MSG95G AIR SEAT IN A 7060, LOOKING TO GET ONE AND I WAS WONDERING IF MOUNTING BRACKETS WERE AVAILABLE OR DO THEY HAVE TO BE MADE?

ALSO PROS AND CONS GRAMMER VERSES K & M AIR SEATS

Replies:

Posted By: REEDE
Date Posted: 11 Apr 2020 at 6:29am

Go to K&M manufacturing web site and look. I sold several of their air ride seats .

Posted By: farmboy520
Date Posted: 11 Apr 2020 at 6:51am

I put a Grammer in and the only I don't like is you almost have to hold the seat down to get in and out. They do have mounting brackets.

-------------
On the farm: Agco Allis 9695, 7060, 7010, R66, Farmall H, and Farmall F20 (Great Grandpa's)

Posted By: tomNE
Date Posted: 11 Apr 2020 at 6:54am

K & M was/is a great AR seat. the brackets were a night mare. I thought i was just being thickheaded so I took the whole works to my AC dealer. Guess what, the mechanic finally had to drill his own holes to make it work. I bought the seat thru them, so no charge for figuring it out. seat worked well.

-------------
AC from the start of my families farming career till the end!

Posted By: farmboy520
Date Posted: 11 Apr 2020 at 6:57am

I'm pretty sure the grammer bracket bolted right up holes already in the cab. Just took 2 people when trying put bolts in because hard to reach spot.

-------------
On the farm: Agco Allis 9695, 7060, 7010, R66, Farmall H, and Farmall F20 (Great Grandpa's)

Posted By: wekracer
Date Posted: 11 Apr 2020 at 7:01am

I can speak to the 7000 series but I have 3 grammar 95s in my 8010, 8050 and 8070. They bolted right in. I highly recommend them over stock.

One thing I noticed on the 8070 is that the seat pan was lower than the other two. It’s newer. So I had new pans bent and cut an inch off the front bracket. It made getting in the seat much easier and gave the seat more travel. I’m only 5’-7

Posted By: Ron(AB)
Date Posted: 11 Apr 2020 at 1:37pm

That's due to the actuator...only the last models had it.