Roller tip rockers for 201, 226 allis motor
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169400
Printed Date: 23 Nov 2024 at 12:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Roller tip rockers for 201, 226 allis motor
Posted By: Robacpuller
Subject: Roller tip rockers for 201, 226 allis motor
Date Posted: 23 Mar 2020 at 8:51pm
|
I make aluminum roller tip rockers for 201 to 226 allis motor. They r 1.70 ratio. Just switch old with these no mods. $250.00 a set. I will b water jetting some more soon providing the place that jets them for me don't get the virus.  Rob 608 228 4843 |
Replies:
Posted By: orange
Date Posted: 24 Mar 2020 at 5:19pm
|
Rob Was going to put a 226 engine together , was going to balance it just to make a smoother engine , just stock , not pulling.Was interested in the roller rockers . what is the 1.70 ratio mean? would they be ok for a stock engine? thanks Terry
|
Posted By: Robacpuller
Date Posted: 24 Mar 2020 at 8:50pm
|
They give more valve lift,means more hp. Don't know about if it would help a stock motor much. Probably not for cost over stock.but it's ur decision to spend the money. I would love to sell u a set but I would not on a stock motor. Thanks for the interest Rob |
Posted By: bradley6874
Date Posted: 24 Mar 2020 at 8:59pm
|
What is stock ratio ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Robacpuller
Date Posted: 25 Mar 2020 at 5:42am
| The r around 1.46 |