B112 questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168960
Printed Date: 30 Nov 2024 at 8:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B112 questions
Posted By: Ewhitford
Subject: B112 questions
Date Posted: 09 Mar 2020 at 12:06pm
|
I have a b112 with a 16hpBriggs in it with a 1inch shaft for the crank. What size in diameter should be used to power front attachments ? 2nd question, I have no power to pull my garden trailer espesially going up hill. I tried several belts, Watched the drive system and nothing seems to be slipping so what am I missing. I have this issue whenever going up a hill or towing our sprayer, wagon or spreader.
Thank you.
|
Replies:
Posted By: Mikez
Date Posted: 09 Mar 2020 at 8:29pm
Posted By: tadams(OH)
Date Posted: 10 Mar 2020 at 2:53pm
|
Check the pulley on the rear, mine throughs the out every so often, can't keep set screw tight.
|
Posted By: HudCo
Date Posted: 16 Mar 2020 at 9:31am
|
you cant beat that modal 32 briggs for power, shaft is 1 inch for the snow blower if the 16 has low power make sure somone has not put a flywheel on with the wrong ploarity i have seen done and it still runs but very poorly
|
Posted By: ACmowerguy
Date Posted: 21 Mar 2020 at 9:49pm
Have you gone through the adjustments for the variable speed system in the service manual? These need to be adjusted periodically as the belt and linkages wear.
-------------
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
Posted By: Animal Cracker
Date Posted: 23 Mar 2020 at 4:21pm
You know its suppose to be a 12 hp right.
|
Posted By: Orangeisgreat190
Date Posted: 09 Apr 2020 at 10:31am
|
I have a B112 with variable speed. Try taking you heel and pulling back toward you on clutch pedal. See if this helps. If it does, I would say ACmowerguy is right, check all rearend adjustments in manual. Also, I replaced the belt on mine and it helped tremendously. The pulleys move in and out to change diameter for speed change. This really wears on the side of the belt.
|
Posted By: Orangeisgreat190
Date Posted: 09 Apr 2020 at 10:32am
|
Forgot to mention, check clutch return spring as well. It could be weak.
|
|