My latest project,,,,
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168756
Printed Date: 29 Aug 2025 at 4:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: My latest project,,,,
Posted By: desertjoe
Subject: My latest project,,,,
Date Posted: 01 Mar 2020 at 11:32pm
|
I made this with materials on hand due to a necessity and no money,,,,,,  |
Replies:
Posted By: desertjoe
Date Posted: 01 Mar 2020 at 11:35pm
|
AW,,,chit,,,double chit,,I friggin HATE this FRIGGIN CHIT FACED IPhone,,,,If I hadn't spent so friggin much money for it ,,I would of already run over it with my tractor,,,,, Anybody know how to fix the pic,,,,??? Please?? CHIT,,I'm goin to bed,,,,,,,!!!!
|
Posted By: JC-WI
Date Posted: 02 Mar 2020 at 12:27am
|
What are you trying to fix?  Nice little press... ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: desertjoe
Date Posted: 02 Mar 2020 at 2:41am
|
Well,,JC,,like most shade tree'ers,,,we don't always have all the tools we need to get things done,,,I had always just used BFH's to knock out and "beat In" bushngs , bearings and what not,,,but Chit,,I'm gettin too friggin old to keep doin that  PLUS my shoulder is aching me more and more and the 3# shop hammer feels like a 16# sob anymore,,, The little HHR I always drive (32MPG) had started shimmyin when you stepped on the brakes and was gettin worst every day,,,So, after a close call, I pulled the right side lower control arm,,,and glad I did as the rubber part of the bushing was completely gone and the metal sleeve was almost worn completely thru,,,!!! I went to Oreillys and autozone and they both told me the bushing was NOT available by itself and I had to buy a complete control arm to the tune of $166,,,,!!! You KNOW ole Joe ain't gonna fall for thet kinda Chit,,so I check out YouTube and theys several videos of them replacing the same bushing them AH'S told me was not available,,So,,I check Ebay and there it is,,!! Yep,,,every bit of $28 each one,,,,friggin Highway Robbery. So I ordered two as the other side was just as bad,!! Delivery was super quick and I used the big vice and hammered and beat the new bushing in that control arm but I made ole Joe a promise that before he tried that again,,,,we were gonna make him a nice El Cheapo Hydraulic Press,,,SO,,now ole Joe has one and even an A/C model too,,!!!  Didn't you notice,??? By the way, JC,,,Thanks for fixin that for me,,,you gonna have to tell me how you do that,,OK,??
|
Posted By: chaskaduo
Date Posted: 02 Mar 2020 at 8:22am
Now you'll never have to press another bearing again. Shoulda made that long ago.  ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: jaybmiller
Date Posted: 02 Mar 2020 at 8:36am
|
NICE ! but, you'll NEED a 20T jack if you ever want to remove the Ujoints from a 4x4 '86 Ford front axle......yeah, I broke an 8T...... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: desertjoe
Date Posted: 02 Mar 2020 at 8:47am
Naw,,,Chask,,,I still have the driver side of the HHR to do is why I went ahead and built the press,,,I just ain't got around to it yet,,,,, Jeeeze,,,Jay,,,something had to be out of kilter if you broke a 20 ton unit,,,,whew,,,,, and I will let you in on a little secret,,,I DO have an almost new 20 ton hyrdaulic jack standing by and I made this press so that "IF" I really had to,,,I could drill some new holes in the base plate and bolt the 20 tonner,,,but sure hopin I never have to,,,,,,
|
chaskaduo wrote:Posted By: shameless dude
Date Posted: 02 Mar 2020 at 10:16pm
| that's a good looker Joe! |
Posted By: desertjoe
Date Posted: 03 Mar 2020 at 1:45am
|
Why THANK YOU Shameless,,,,,
,,,,and,,,and,,,you can use it any time you need to,,, |
Posted By: jaybmiller
Date Posted: 03 Mar 2020 at 5:27am
|
no, I broke the 8 ton THEN had to ,ugh, argg, BUY a 20 tonner. EVERY time I 'released' a cup from the cross, kaBAMM...6 times then kathunk....8 T jack broke. These were the original 'steering' ujoints on the front axle shafts. Naturall th replacements had grese Zerks ....hmmm I still have te funky special socket for the hub nuts....only used twice.....collecting dust for 30? years... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 03 Mar 2020 at 8:27am
|
Nice jack Joe..... yea, as you get older you figure a LOT of ways to get things done... I use to hoist 200 pound parts into the pickup, onto the bench, push across the floor... Now i gots me a 1000# electric cable hoist and a hydruailc table for moving that chit !! Keep my "lifting capacity" to a 50# bag of dog food !! ------------- Like them all, but love the "B"s. |
Posted By: desertjoe
Date Posted: 03 Mar 2020 at 9:28am
|
Yeah,,Steve,,I hear ya,,!! I now gots to wait around in the dog food section at walmart,,,,waitin on a young strong Walmart fellar to help me with them 50# bags to get it onto the cart,,,I was "waitin" when this hefty young walmart Girl comes down the isle and asks if I need something?? I told her I was waitin on a guy to help load the 50#'er as it was down low close to the floor,,,she asks "which one you want?" I told her wait and lemme get this end and,,,,and,,,before I could get my slow azzed body movin,,,she reached down and jerked thet sob up off the floor and throwed in on my cart,,pretty as you please,,,,!!! Left me standin there with my hands reachin out for thin air,,,, She winked at me and begged me to have a great day and traipsed off whistlin as she went........ Can us older fellars fall in love every day,,,????
I came to my senses pretty quick when I realized she was wearing the same perfume my wife does,,,,,, |
Posted By: Ted J
Date Posted: 05 Mar 2020 at 1:05am
|
Looking at the cost $$$$ of a 20 T jack and guess what, the 20 ton press at HF is only a little more $$. But yeah, that don't do you any good when you're broke... Joe, you can borrow mine anytime. Ya, JC, how'd you do that? ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: Steve in NJ
Date Posted: 05 Mar 2020 at 8:06am
Joe you should've kept yer' old flip phone like I did. To much technology to be bothered with any of that crap those new fangled things do. My old flip phone works fine. All I do is talk on it. That's it! LOL! Customer's want to send me text's & pics. I tell em' don't bother, just send it to our e-mail address and I'll git' it. My old phone don't take text's, pics or any of that stuff. A lot less aggravation... LOL!  Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: desertjoe
Date Posted: 05 Mar 2020 at 8:41am
|
You know what,,,Steve in NJ,,?? You just gave me a great idea,,!! I still have the "old" smart phone I was using when I got talked into buying an "IPhone", because they are the "In Thing" these days,,,,,well,,they might be the in thing but they can't transfer pics worth a CHIT,,!! It is an Android so maybe,,,,,, I'm gonna dig it out, recharge the battery and use it to take my pics cause it was so easy to transfer pics from it to my computer. Thas a great, great idea,,Steve,,,, I'm hoping it does not have to have service in order to transfer pics as i dropped that service when I went with the iphone,,,,,???
|
Posted By: desertjoe
Date Posted: 05 Mar 2020 at 8:47am
Well Ted,,,when you gots 3 bottle jacks under the counter,,waitin to be put to work, plus all the other materials was out back,,,doing nuttin but growing rust,,the only'ist cost was my labor (and I don't charge myself anything) then the HF one was lots higher then my home built model,,PLUS mine is a sure enough A/C model,,,,,Ya didn't even notice that did you,???
|