Farm Equipment - m2 header height question

Print Page | Close Window

m2 header height question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16840
Printed Date: 26 Jun 2024 at 12:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: m2 header height question

Posted By: clint
Subject: m2 header height question
Date Posted: 19 Aug 2010 at 4:39pm

i bought another m2 with the header height switch on the top w the other buttons but not the 3 position knob by the shifter. the one in the other machine is junk

do i need it? will it worl without this? should i add it? how do i wire for a series 3 head?

-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62

Replies:

Posted By: Adam Stratton
Date Posted: 19 Aug 2010 at 5:00pm

You will only need the 3 position switch to run a floating header with the robot, you can run any other header (or even a floater if you dont want the robot) without one. We have an L2 that was adapted to run a series 3 header that has extra wires connected to the reel speed button with a separate add-on connector to connect it to the solenoid on the hydraulic reel speed on the header. Hope this helps. Good luck!

Posted By: clint
Date Posted: 23 Aug 2010 at 8:49am

i want the real speed and the robot

-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62