Farm Equipment - OIL FILTER STAND PIPE

Print Page | Close Window

OIL FILTER STAND PIPE

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164478
Printed Date: 13 Oct 2025 at 10:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: OIL FILTER STAND PIPE

Posted By: mikeyD
Subject: OIL FILTER STAND PIPE
Date Posted: 20 Sep 2019 at 3:13pm

Having problem with my C - pressure gauge barely makes it to N.
Decided to change oil. After removing filter, noticed stand pipe was installed with the 2 holes down. Don't they go toward the top of the filter?

About how far into the base does the pipe go?

Thanks

Replies:

Posted By: mdm1
Date Posted: 20 Sep 2019 at 3:26pm

Holes go up and it should go in 1/2 in into base. I have read to squirt some oil down the tube if maybe it lost it's prime.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!

Posted By: mikeyD
Date Posted: 20 Sep 2019 at 3:28pm

mdm1 - thanks for your reply...will correct it and hopefully it will change my oil pressure favorably.