190XT Diesel Weight
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164420
Printed Date: 27 Nov 2024 at 8:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT Diesel Weight
Posted By: 55WD45d
Subject: 190XT Diesel Weight
Date Posted: 18 Sep 2019 at 9:55am
|
What weight can a 190XT Diesel be brought down to with out major modifications? I am mainly looking at putting pressed steel wheels on the back and unbolting/ removing unnecessary parts ( 3 point...etc) for tractor pulling. I want to run it in the farm stock class so I can't get too crazy. Thanks
|
Replies:
Posted By: DougG
Date Posted: 18 Sep 2019 at 6:55pm
| Had a 200 like this that your wanting to do with, got it to 8700 easy, but had 3 pt etc on it,, with your ideas, pressed steel , no 3 pt prolly around 7500, put a hollow front end box on it looses 400 lbs |
Posted By: DrAllis
Date Posted: 18 Sep 2019 at 9:19pm
| Helped a customer years ago with a cabless 190XT S-3 with 18.4 x 38's with cast iron centers, no weights or fluid anywhere and I think the 3 point was still on it and he pulled it in the 9,000 lbs class at 125 HP. |
Posted By: DougG
Date Posted: 18 Sep 2019 at 9:51pm
| That's where the ole 200 was |
Posted By: KevinON
Date Posted: 19 Sep 2019 at 8:13am
| You should be able to get one down to less than 7000lbs. I do know of a gasser unit in our area that is below 5750, lighter rear end and engine, though. I am building one for a 7000lb super light mod farm class. |
Posted By: Acllss puller
Date Posted: 26 Sep 2019 at 2:24pm
| I’m building new rails for mine so I have aluminum frame rails and light steel front end available rails appear stock and are solid they are good pieces |
Posted By: 55WD45d
Date Posted: 26 Sep 2019 at 3:28pm
|
Thanks for the information. I might have more questions if I decide to go ahead with the project.  Thanks again
|