Farm Equipment - ca 125ci oil pressure

Print Page | Close Window

ca 125ci oil pressure

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164412
Printed Date: 07 Oct 2025 at 12:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: ca 125ci oil pressure

Posted By: caRon
Subject: ca 125ci oil pressure
Date Posted: 17 Sep 2019 at 11:13pm

What should the oil pressure be at idle and at high throttle on a CA 125 engine?

-------------
CA Tractor

Replies:

Posted By: Alex09(WI)
Date Posted: 17 Sep 2019 at 11:46pm

I believe the oil pressure is 12 or 15psi from the factory. It will be lower as the engine warms up. Warmed up at idle expect it to be 8 or 10, but depends on how worn your engine is. 5 psi is ok at idle but under load 5 is too low in my opinion.

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY

Posted By: Dick L
Date Posted: 18 Sep 2019 at 6:48am

On the CA sadly the condition of the engine has (nothing) to do with the oil pressure on the gage. Oil pressure on the gage only shows the pressure between the pump and the oil filter. The volume of oil from the pump flows thru the pump stem into a hollow camshaft some out the spinning camshaft thru little holes to lube the camshaft and main bearings. The rods pick up the oil from the little holes that are in line with the rods thru holes in the rods that pick up the oil as it spins forcing the oil into the rod bearings.
This is the reason it does not take a higher pressure to keep the bearings lubed.