Pulling Forum - 190 xt putting pressure in the cooling system

Print Page | Close Window

190 xt putting pressure in the cooling system

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163172
Printed Date: 23 Nov 2024 at 2:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 xt putting pressure in the cooling system

Posted By: DougG
Subject: 190 xt putting pressure in the cooling system
Date Posted: 28 Jul 2019 at 9:28am

Got an XT that just after a minute or two running its putting pressure in the cooling system, have a antifreeze jug as a catch can - and it spits into there pretty good,, Im guessing its the head gasket, any other options ? Does anyone make an all copper head gasket better than Agco ? This has the 450 injector pump head and pushing a lot of fuel

Replies:

Posted By: injpumpEd
Date Posted: 28 Jul 2019 at 10:00am

I have MLS head gaskets and drop on fire rings, or fire rings for cut sleeves. A 301 with a 450 pump would definitely blow a stock gasket.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: DougG
Date Posted: 28 Jul 2019 at 10:27am

Ok thanks Ed, while its off Im thinking of having it ported and polished - or do whatever to get it to flow more air, any recomendastions there ?

Posted By: bsallis180
Date Posted: 28 Jul 2019 at 3:33pm

426 valves, pull the sleeves, cut for rings and notch for clearance.