Print Page | Close Window

Remove wd pto shaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162825
Printed Date: 10 Sep 2025 at 4:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Remove wd pto shaft
Posted By: old farmer
Subject: Remove wd pto shaft
Date Posted: 15 Jul 2019 at 9:37pm
WD 45 PTO shaft is stuck to drop box shaft. It looks like the bolt got part way sheared off and is stuck TIGHT! What is the best way to get it to move? Rear bearing is bad.


Replies:
Posted By: DrAllis
Date Posted: 16 Jul 2019 at 7:12am

Hook the PTO shaft to a real load and make it spin loose from the stub shaft. Then , pull it off.

Posted By: old farmer
Date Posted: 16 Jul 2019 at 7:59am
Thanks DrAllis, will get with a friend that has a dyno . Should get a good load then.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net