Farm Equipment - 1953 trip bucket loader install?

Print Page | Close Window

1953 trip bucket loader install?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162704
Printed Date: 24 Aug 2025 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1953 trip bucket loader install?

Posted By: Hunt4Allis
Subject: 1953 trip bucket loader install?
Date Posted: 10 Jul 2019 at 11:59pm

This is directly related to me changing my narrow front end to a wide front end first...
Once I'm done changing the narrow to wide front end I'm also going to be installing a trip bucket loader so I'm wondering where the controls for this will be and where the hydraulic hook up to and if this will conflict with having a 5 foot brush hog on the back?
I believe I'm going to have to keep the trip bucket loader and wide front end on this tractor to give it additional weight on the front to help facilitate keeping the front down when using and raising and lowering the large 5 ft brush hog on the rear...

Replies:

Posted By: MACK
Date Posted: 11 Jul 2019 at 6:57am

What tractor are we talking about? MACk

Posted By: CTuckerNWIL
Date Posted: 11 Jul 2019 at 8:37am

Most loaders on Wd's or 45's were hooked to the remote outlet, which would make the loader go up or down when you use the lift arms. If you want a loader AND a 3 point attachment at the same time, you need to install a diverter valve and plumb the lift arms separate of any connection used by the loader.
The same thing would be true for the CA. You have to run hydraulic fluid out of the pump to a diverter valve then run one side to the loader and one side to the lift arms. You then lose the delayed lift and drop for the CA mounted cultivator because both rear rams would be powered by one source.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF