Farm Equipment - 1960 AC d15 questions?

Print Page | Close Window

1960 AC d15 questions?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162562
Printed Date: 18 Jul 2025 at 5:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1960 AC d15 questions?

Posted By: Hunt4Allis
Subject: 1960 AC d15 questions?
Date Posted: 07 Jul 2019 at 11:27am

So I'm not familiar with this size tractor but my Allis Chalmers b and my Allis Chalmers CA both have exterior hydraulic cylinders on them. I did not see anything that resembled what I'm used to seeing for hydraulics at the rear of this d15 I'm looking at there were just two arms coming up at a 45 degree angle that look like they were integral to the rear end? Did they build the hydraulic cylinder or mechanism into the rear of these tractors instead of having external hydraulic cylinders for the three-point? The current owner said he had the points reset and that's all it needed to run nice now does that sound typical?

Replies:

Posted By: jaybmiller
Date Posted: 07 Jul 2019 at 11:45am

Yes, the cylinder is internal, same as a D-14. Have a look at the 'D-14 -odds and end' 'thread, there's some GREAT pictures of it !! Over the years either or both the hydraulic hose/ cylinder O-ring/seals will leak causing the oil to FILL the 'rear end'. NOT the ned of the World as repairs go. I had the hyd. shop add a swivel fitting to the hose as it made the install easier.

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: TimNearFortWorth
Date Posted: 07 Jul 2019 at 12:50pm

Just ordered up everything I need for a D15II, from Sandy Lake on this site.

Hose assy. (they make this up themselves) @ 26.81

Seal kit for cylinder 23.17

Top gasket where transport valve mounts 11.00

Call Brenda at Sandy Lake, she is great at AGCO parts by part number and can usually get anything you need.