Wd45 engine ?
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160491
Printed Date: 23 Nov 2024 at 3:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wd45 engine ?
Posted By: Acllss puller
Subject: Wd45 engine ?
Date Posted: 29 Apr 2019 at 2:32pm
|
? For Dr Allis ; have you ever used Hercules 2” journal rods 8 “ long on a 45 crank offset ground ? If so what piston did you use ?
|
Replies:
Posted By: DrAllis
Date Posted: 30 Apr 2019 at 7:25am
|
Never been there or dun that. Good luck.
|
Posted By: WF owner
Date Posted: 01 May 2019 at 9:06am
|
Maybe Marty Nelson (Wi50)?
|
Posted By: CAL(KS)
Date Posted: 01 May 2019 at 10:30am
Marty liked to to use H farmall rods up to 5.5 stroke or so, never heard him say anything about hercules
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: wi50
Date Posted: 12 Jun 2019 at 10:11pm
I used a set in one engine. They're a nice rod. Just a bit uncommon to find is all. The engine I used them in was a deal where someone's crankshaft shop had messed up the crank so the I decided of the crankpins was off. I had to re weld it to get it ground correct. As far as piston, that's up in the air as to hour bore size, desired compression ratio, etc.
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: wi50
Date Posted: 12 Jun 2019 at 10:18pm
I've got a bunch of flathead continental rods that are a 2.062" crankpin diameter and a few different lengths. 7.875, 7.937, if my memory serves me correctly. I don't have time to mess with much anymore but I've got a few sets of a few different lengths on a shelf that I'd like to get rid of if they interested someone.
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: Carl(NWWI)
Date Posted: 11 Jul 2019 at 11:17pm
|
Marty, we may have to talk again. Been trying to build the WD up some more for the last couple winters but never seems to happen, hoping to try for this winter, if you have any parts laying around and a little guidance. Hope things are going well with the super.
|
Posted By: Acllss puller
Date Posted: 17 Jul 2019 at 11:20pm
|
Interested in the longer continental rods how much do you want for them .
|
|