Pulling Forum - Turning a 426 AC engine to 466 ci ?

Print Page | Close Window

Turning a 426 AC engine to 466 ci ?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157491
Printed Date: 23 Nov 2024 at 5:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Turning a 426 AC engine to 466 ci ?

Posted By: DougG
Subject: Turning a 426 AC engine to 466 ci ?
Date Posted: 22 Jan 2019 at 4:31pm

Curious on what sleeves and piston need to be used after matching the block on a 426 to make it 466 cubic inches?

Replies:

Posted By: cms
Date Posted: 22 Jan 2019 at 5:16pm

Easiest would be custom sleeves and pistons. Will hold up better than cast iron sleeves and stock pistons because of better material.

Posted By: bsallis180
Date Posted: 22 Jan 2019 at 8:22pm

You will not need to bore the block to get 466ci just a 4.450 bore and find a piston close to that or custom piston

Posted By: DougG
Date Posted: 23 Jan 2019 at 4:26am

I Gottcha thanks for the replys

Posted By: goomer
Date Posted: 24 Jan 2019 at 6:57pm

We use cummins pistons with allis rods reworked to fit and a custom sleeve. Puts it a bit past 470ci