Pulling Forum - Twin charger 301

Print Page | Close Window

Twin charger 301

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157044
Printed Date: 22 Nov 2024 at 10:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Twin charger 301

Posted By: 190xt llss
Subject: Twin charger 301
Date Posted: 08 Jan 2019 at 5:31pm

I’m building a llss 190xt with a 301 I’m looking for suggestions on a twin charger setup

Replies:

Posted By: Acllss puller
Date Posted: 08 Jan 2019 at 7:49pm

Call Dennis at FVP !!!! Smalll s400 and a gt45 on top maybe, just call him .

Posted By: Acllss puller
Date Posted: 08 Jan 2019 at 7:52pm

Head and flow will be your problem . Can be improved with extreme work !

Posted By: DrAllis
Date Posted: 09 Jan 2019 at 7:23am

WHAT ARE YOUR RULES ???? Some organizations only allow a maximum inlet/outlet size !!

Posted By: 190xt llss
Date Posted: 09 Jan 2019 at 8:14am

I can run any two turbos. No intercooler. Water injection. I might add I’ve already got the head work done and custom exhaust and intake housings to let it breathe better.

Posted By: DrAllis
Date Posted: 09 Jan 2019 at 9:55am

So, how many CC's of fuel and what type of injection pump and injectors do you have? You can run bigger turbo's with 1000 cc's versus 700 cc's of fuel. I assume you are open RPM's ??

Posted By: 190xt llss
Date Posted: 09 Jan 2019 at 10:12am

P-3000 capable of 760cc 4x30 injectors yes open rpm

Posted By: bsallis180
Date Posted: 09 Jan 2019 at 10:38am

Doc no intercooler? Over 1000cc on 301inches?

Posted By: DrAllis
Date Posted: 09 Jan 2019 at 12:18pm

So a 190XT with any size twins and 760 cc's of fuel should need a gear waaaay faster than direct drive road gear ? Yes or No ?? Under 7000 lbs ??

Posted By: 190xt llss
Date Posted: 09 Jan 2019 at 12:30pm

10% over road gear 6400 lbs

Posted By: 190xt llss
Date Posted: 09 Jan 2019 at 12:31pm

If I can build the power for a faster gear then that’s where I’ll go

Posted By: DougG
Date Posted: 09 Jan 2019 at 4:53pm

Any videos? Sounds like a good one

Posted By: Acllss puller
Date Posted: 09 Jan 2019 at 10:01pm

Power to be had with the newer injectors with 5 hole or even 6 hole !

Posted By: KevinON
Date Posted: 11 Jan 2019 at 8:26am

Best of luck in your build! I am building a 7000lb Super Light Mod Farm 190XT right now, but my next build will be a twin charger 301. Cheers.

Posted By: Acllss puller
Date Posted: 16 Jan 2019 at 6:18pm

A 180 in direct is 22.7 you should be able to get at least that fast 21.6 would be good if your doing it all ? Good luck

Posted By: 190xt llss
Date Posted: 16 Jan 2019 at 6:40pm

I’ve got 10 over gears and going with 20.8’s