Farm Equipment - Rear Brakes on 6000 series

Print Page | Close Window

Rear Brakes on 6000 series

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156927
Printed Date: 25 Aug 2025 at 6:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rear Brakes on 6000 series

Posted By: WNYBill
Subject: Rear Brakes on 6000 series
Date Posted: 04 Jan 2019 at 9:06am

I am seeing some great pictures of the 6080 split. Anybody got pictures of the rear brakes on a 6060? Something is stuck or broke in the rear end where the caliper and disk are. In the service manual I don't see a good diagram of what it all looks like once you get the wheel and axle housing off.

Right brake works, but the left brake pedal is HARD, no movement and no brake.I have aggressively bled the brakes and don't think that is the problem.

Bill

Replies:

Posted By: DrAllis
Date Posted: 04 Jan 2019 at 12:05pm

I think your problem is the brake pedal itself OR the plunger on the brake valve is stuck.

Posted By: bradley6874
Date Posted: 04 Jan 2019 at 2:46pm

When y when you open the bleeder screw to bleed it does the pedal move free then if not it's in the pedals itself up under the dash if it moves free then it's inside the brakes

Posted By: Alvin M
Date Posted: 04 Jan 2019 at 4:28pm

jack it up if wheel turns hard disc might be broken can check both sides to see if it turns the same

Posted By: WNYBill
Date Posted: 05 Jan 2019 at 9:22am

Both brake pedals work freely when bleeding the brakes. I am sure the problem is in the rear end where the caliper and disk are. Hoping somebody has a picture, service manual is vague at best.