Pulling Forum - WD Iginition

Print Page | Close Window

WD Iginition

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156543
Printed Date: 23 Nov 2024 at 5:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Iginition

Posted By: LFIFM45
Subject: WD Iginition
Date Posted: 20 Dec 2018 at 9:20am

Does anyone know if all distributers are interchangeable between a W.D. ,W.D. 45 and a D-17. What about the Pertronix points replacement module, are these all the same ?

Thank you

Replies:

Posted By: Steve in NJ
Date Posted: 20 Dec 2018 at 9:42am

The WD & WD45 Distributors are the same as far as dropping them in and using them. The centrifical advance is a tic different in each Distributor but they're interchangeable and would work fine in either the 201 or 226 engines. The D17 is a whole different animal..

There is one Pertronix unit that will work in most of the earlier 4 cylinder cast iron Distributors. (1111411, 1111735, 1111745, 1112609 as examples) The D17 again takes a different Pertronix unit. We're a Pertronix dealer if you're looking for an E.I. We also rebuild Distributors, and have most of the AC Distributors for exchange including the D17/D19 Distributor with or without tach drive.. Visit our website.. HTH

Steve@B&B

bb-customcircuits.com

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: LFIFM45
Date Posted: 23 Dec 2018 at 5:02pm

Thank you, my numbers match, great help !!!