finished another one -sisters D14
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156447
Printed Date: 22 Nov 2024 at 11:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: finished another one -sisters D14
Posted By: Acdiesel
Subject: finished another one -sisters D14
Date Posted: 16 Dec 2018 at 3:50pm
|
thought i would share some of the pictures from the restoration i did on my sisters 1957 d14. she dropped it off on July 4th after the parade and i finished it Saturday Dec. 15. just in time for Christmas. not a bad job, had to replace every seal on it,they were all pretty much leaking, went through the transmission and rear end, and replaced all the bad bearings, new clutch, and brake linings. the engine was in real good shape, (good compression, tight, non-smoker, ran and starts awesome, did put new gaskets on it. had most of the original gauges in good shape, minus the temp. gauge had to weld the front axle was busted up pretty good fenders were pretty ruff on the back sides smashed, but got them straightened out pretty well. kept it all original with the 6 volt system. thanks for looking. dan                             ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Replies:
Posted By: Calvin Schmidt
Date Posted: 16 Dec 2018 at 4:08pm
|
Very nice work !!! ------------- Nothing is impossible if it is properly financed |
Posted By: 48ACWD
Date Posted: 16 Dec 2018 at 4:10pm
| Awesome job Dan!! Looks fantastic |
Posted By: Sherman Farms
Date Posted: 16 Dec 2018 at 4:23pm
|
REALLY NICE !!!!!! ------------- B, C, RC, 3 wc,2 wd,3 wd45, d15, d17, d19, d21, 190, 440, 7040, 918 backhoe, 12 roto balers, 7 60 combines, 40, 66,2 72,90 super, sp100, Gleaner E, F3, 3 L2, R62, and much more |
Posted By: steve(ill)
Date Posted: 16 Dec 2018 at 4:33pm
|
Nice looking....... good job........ always liked the D14 size and class tractor ! ------------- Like them all, but love the "B"s. |
Posted By: wfmurray
Date Posted: 16 Dec 2018 at 4:51pm
| Love the D 14 .We got one in June of 57.It was way ahead of others.Nothing could compare with the BIG STICK.Not a big tractor but real precky Dad passed and i had it several years and let nephew have it . It has gone home and his boys love it . |
Posted By: ACinSC
Date Posted: 16 Dec 2018 at 5:39pm
| I agree , very nice !! |
Posted By: 1852 Moore Farm
Date Posted: 16 Dec 2018 at 5:58pm
| Grew up on a 14. Thanks for posting the pics. Great work. |
Posted By: Dave(inMA)
Date Posted: 16 Dec 2018 at 6:15pm
Wow! Great looking tractor!! Can I bring my D14 out to Rochester for similar treatment next time we're visiting family in Ohio?  ------------- WC, CA, D14, WD45 |
Posted By: Ranse
Date Posted: 16 Dec 2018 at 6:39pm
| Great job! |
Posted By: Steve in NJ
Date Posted: 16 Dec 2018 at 7:20pm
|
A lot of work there! Came out beeeutiful!! Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: shameless dude
Date Posted: 16 Dec 2018 at 7:53pm
| great job! |
Posted By: darrel in ND
Date Posted: 16 Dec 2018 at 8:01pm
| You could restore my D 14 any time! Darrel |
Posted By: Acdiesel
Date Posted: 16 Dec 2018 at 8:07pm
|
thanks for all the great comments!! my sister bought this tractor from one of the forum members in Hamilton Ohio, but i can't think of his name. Dan ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: ac45dave
Date Posted: 16 Dec 2018 at 8:34pm
 ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Acdiesel wrote:Posted By: DSeries4
Date Posted: 16 Dec 2018 at 9:02pm
|
Very nice job! Factory power steering to boot! What kind of paint did you use? ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DrAllis
Date Posted: 16 Dec 2018 at 9:55pm
| Nice to see one painted the correct color and correct decals and dents gone. |
Posted By: Don(MO)
Date Posted: 16 Dec 2018 at 10:08pm
|
Nice job, she's standing tall & looking good!!!!!!!!!!!!!! ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Sugarmaker
Date Posted: 16 Dec 2018 at 10:18pm
|
It looks brand new! Great paint job and attention to details! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: john(MI)
Date Posted: 17 Dec 2018 at 1:17am
|
Nice job, I'm sure she'll be happy with it. I'm just gonna keep mine in it's work clothes, but it does need a few seals. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Charlie175
Date Posted: 17 Dec 2018 at 6:19am
|
Very Nice! ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: REEDE
Date Posted: 17 Dec 2018 at 6:41am
| Mighty fine. |
Posted By: Unit3
Date Posted: 17 Dec 2018 at 6:59am
|
It looks better than new. I like the picture with the headlights on. Very Nice Work! ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: ihc pickups
Date Posted: 17 Dec 2018 at 9:34am
|
Awesome, Awesome job. ------------- Mike |
Posted By: Sugarmaker
Date Posted: 17 Dec 2018 at 9:40am
|
Acdiesel, Ok, I love the tractor But I have to ask about your building? Need some specs! Would really like to have something that size? Insulated? Heat? Dimensions?
Sorry to hijack your thread, but I bet I am not the only one interested! BTW, your sister is a pretty luck girl! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Stan IL&TN
Date Posted: 17 Dec 2018 at 10:21am
|
That's a keeper. Nice job!!😀 ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |
Posted By: tadams(OH)
Date Posted: 17 Dec 2018 at 2:14pm
|
Lots of work going over a tractor like that but the finished job is what is worth all the effort. Great job.
|
Posted By: Reindeer
Date Posted: 17 Dec 2018 at 7:12pm
|
Looks terrific! Good work! You got into it pretty far, but should be ready to go to work for many more years. ------------- |
Posted By: d17brown
Date Posted: 17 Dec 2018 at 7:27pm
|
very nice ------------- phil |
Posted By: Dan Hauter
Date Posted: 17 Dec 2018 at 10:15pm
| Awesome restoration! Yes, your sister is lucky to have you. Dan Hauter. |
Posted By: 1955CA
Date Posted: 17 Dec 2018 at 11:04pm
| That is awesome! Very nice work. |
Posted By: GregLawlerMinn
Date Posted: 18 Dec 2018 at 9:18am
|
Dan Great job. My sister would be estatic to have a brother like Dan. Do you suppose Dan's sister would lend him to my sister for a while? ------------- What this country needs is more unemployed politicians-and lawyers. Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC |