Farm Equipment - 6140 Lower Radiator Hose

Print Page | Close Window

6140 Lower Radiator Hose

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155141
Printed Date: 08 Sep 2025 at 6:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6140 Lower Radiator Hose

Posted By: TimCNY
Subject: 6140 Lower Radiator Hose
Date Posted: 29 Oct 2018 at 2:57pm

AGCO-Allis P/N 72100671, lower radiator hose for an Allis Chalmers 6140 - anyone have a source? Many places, sponsors here as well, have the upper radiator hose but I've not been able to locate a lower hose anywhere. I'd even be happy with specs so I can try and find an alternative, but no-go. All help appreciated.

Thanks,
- Tim

Replies:

Posted By: JoeM(GA)
Date Posted: 29 Oct 2018 at 3:54pm

Tim, it doesn't look like it's too complicated of a hose, on heavy equipment I have had to find ends that will fit the radiator and the engine and then have a piece of muffler pipe done for the middle. Just a suggestion if all else fails.

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Alvin M
Date Posted: 29 Oct 2018 at 4:12pm

use two hoses you can use plastic connector in middle or agco for 70.68

Posted By: TimCNY
Date Posted: 29 Oct 2018 at 6:32pm

Yeah, sounds like my best option. $70.68?!?!?! Yeah... no. but I'm curious, I searched by that part number and it came up with "Sorry, no matches for your request" or whatever. How/where did you find that?

Thanks again!

Posted By: Alvin M
Date Posted: 30 Oct 2018 at 6:36am

agco parts books .com

Posted By: TimCNY
Date Posted: 30 Oct 2018 at 7:15am

OK, got it. I can only look-up, never placed an order etc. to gain full access. Thanks again.

Posted By: geohauck1
Date Posted: 01 Sep 2025 at 11:03am

I know I'm way too late here, but what I did was use a universal hose from Advance Auto (Part Number 81091 or 81091T) and cut open a hydraulic hose and zip tied it over to protect it from the sheet metal.

Hope this helps the next guy someday