fairbanks morse magnito
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153117
Printed Date: 13 Aug 2025 at 8:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: fairbanks morse magnito
Posted By: HaroldOmaha
Subject: fairbanks morse magnito
Date Posted: 17 Aug 2018 at 3:41pm
|
Anyone have info or can tell me where to find it on a Fairbanks vertical mount model Z 4B4B thought to be used on early WCs and MMs. need schematic and timing mark. Thanks Harold |
Replies:
Posted By: TomMN
Date Posted: 18 Aug 2018 at 8:00am
The only things I can find searching for Fairbanks Morse and Z are their hit and miss engine and a one cylinder Z impulse coupler. Flange mount mags from Fairbanks Morse used on Allis Chalmers 4 cylinders were RV4B, FM4B, FMK4B, FMO4B, FMJ4B, and FMX4B. And the B should be followed by a 3, as FMJ4B3 etc. if it was originally shipped to Allis Chalmers. Could you show a picture of the mag? |
Posted By: DougS
Date Posted: 18 Aug 2018 at 11:52am
|
Here's a place where you can get the gears if the timing marks are worn off. http://rebuiltmags.com/parts_Fairbanks-Morse.php" rel="nofollow - http://rebuiltmags.com/parts_Fairbanks-Morse.php |
Posted By: HaroldOmaha
Date Posted: 19 Aug 2018 at 2:19pm
|
Thanks fella's I looked this up for a good friend and he said he appreciated it. Harold |
Posted By: Phil48ACWC
Date Posted: 19 Aug 2018 at 5:33pm
|
http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/%20" rel="nofollow - http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/
Check out above site.
|
Posted By: Phil48ACWC
Date Posted: 19 Aug 2018 at 5:35pm
|
http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/%20" rel="nofollow - http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/
Try it again.
|
Posted By: Phil48ACWC
Date Posted: 19 Aug 2018 at 5:36pm
|
http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/%20" rel="nofollow - http://www.oldcroak.com/fmj-series-1942-bulletin-2856a/
If you paste the above site in a Google search, it works.
|
Posted By: DougS
Date Posted: 19 Aug 2018 at 7:00pm
| He has a FMZ, Phil. I’m not familiar with it but I suspect that it times the same way. |
Posted By: David Maddux
Date Posted: 20 Aug 2018 at 8:58am
| When did the WC stop using the rv4 mag? |
Posted By: DougS
Date Posted: 20 Aug 2018 at 9:03am
| It probably depends on which engine was used at the time. |
Posted By: Bill Long
Date Posted: 20 Aug 2018 at 10:37am
|
By the way that chart should be added to the information page. It has excellent data that can be most helpful Good Luck! Bill Long
|