Farm Equipment - 200 hydraulics

Print Page | Close Window

200 hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150380
Printed Date: 28 Aug 2025 at 11:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 hydraulics

Posted By: acplowboy45
Subject: 200 hydraulics
Date Posted: 11 May 2018 at 10:44pm

Was discing tonight and all of sudden the disc wouldn't raise and power steering wouldn't work..is there a spool like the 190 pumps that have to cleaned or any ideas....going to drain all fluids and change filter in morning to see if that doesn't help.

Replies:

Posted By: DrAllis
Date Posted: 11 May 2018 at 10:49pm

I'm gonna guess you are very low on hydraulic oil. Take at least 5 gallons with you and figure out where it went. CHECK THE TRANSMISSION FOR BEING OVERFULL !!!

Posted By: SteveMaskey(MO)
Date Posted: 11 May 2018 at 11:29pm

Splines wore out on my XT pump and it quit going down the road. Did the same as yours, no hydraulics at all

Posted By: acplowboy45
Date Posted: 12 May 2018 at 12:20pm

Just changed fluid and filter for hydraulics. Still no steering and nor do the lift arms lift..any suggestions.

Posted By: acplowboy45
Date Posted: 12 May 2018 at 2:12pm

I tore into the pump and I'm working on getting the plunger out but I keep finding little bitty pieces of blue rubber what could that be.

Posted By: Lynn Marshall
Date Posted: 12 May 2018 at 3:14pm

The section seals and the seals under the wear plates are a blue Teflon material. Sounds like a complete rebuild is in order. I guess it could also be blue silicone from some previous work??