Farm Equipment - d10 III hydraulics

Print Page | Close Window

d10 III hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149370
Printed Date: 11 Oct 2025 at 2:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d10 III hydraulics

Posted By: JimD
Subject: d10 III hydraulics
Date Posted: 11 Apr 2018 at 4:23pm

Anyone have luck replaceing or rebuilding the control valves on a D10 Series III.

The proper 3 point pushes fluid if the engine is running and was capped when I bought it.

1 valve did work, then got super slow, and no isn't working ,but leaking out the back. The last valve only works if the 1st valve is in the opposite position. Really odd to me.

Need to get the little tractor back to usable.

JIm D

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Replies:

Posted By: JimD
Date Posted: 12 Apr 2018 at 9:01am

bump

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: Tracy Martin TN
Date Posted: 12 Apr 2018 at 9:04am

Sounds like broken springs and or stuck spools.Might look at if it is farmer plumbed also. HTH Tracy

-------------
No greater gift than healthy grandkids!