Construction and other equipment

Print Page | Close Window

HD11EC help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149316
Printed Date: 20 Aug 2025 at 10:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD11EC help

Posted By: dclifton
Subject: HD11EC help
Date Posted: 09 Apr 2018 at 2:27pm

Ive got an HD11EC that a buddy was going to borrow. Well against my better judgment he hoped on and i showed him how to run it and let him get the feel for it. Somehow when he shifted gears i think he pulled the clutch in and shifted into a gear about the same time. Anyhow from what i can tell he stuck the gear shift lock in. I have undone the controls that go over to the clutch lever and have ran a bolt through the yoke to see if i could pry on it and pop it out but, no luck.

Have any of you ever had this happen and if so how did you get it out?

Replies:

Posted By: gemdozer
Date Posted: 09 Apr 2018 at 4:14pm

If he shift and pull the cluch in same time maybe the brake cluch is't working and you should look on right side cluch housing if the rod shifting lock plunger is't broken and the probleme should be there.

Posted By: dclifton
Date Posted: 09 Apr 2018 at 5:19pm

The rod isn’t broke the plunger is stuck in the transmission side under the gear shifter.

Posted By: CAL(KS)
Date Posted: 10 Apr 2018 at 8:32am

If the plunger wont come out it sounds like you need to pull off the shifter housing and see whats hung up

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: gemdozer
Date Posted: 10 Apr 2018 at 1:31pm

I dismantled 5 HD11transmissions for parts some had fork and sliding collar was brooking

and pin shifting shaft interlook was jam in plate gear shift lock