Print Page | Close Window

First project in new shed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148945
Printed Date: 21 Aug 2025 at 9:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: First project in new shed
Posted By: Kenny L.
Subject: First project in new shed
Date Posted: 29 Mar 2018 at 8:31pm
Finally got the new shop to where I could start using it I still have to move the work benches and welder bolt & nuts and thing like that But I need my A frame to take the front off my D-15I so in it went.  



Replies:
Posted By: LeonR2013
Date Posted: 29 Mar 2018 at 8:54pm
That looks really good. Hope you enjoy it.


Posted By: shameless dude
Date Posted: 29 Mar 2018 at 11:09pm
yer floor is dirty already! where's the beer fridge?


Posted By: Sugarmaker
Date Posted: 30 Mar 2018 at 8:16am
Very nice looking shop! I think I need something like that. More pictures? Size and specs?
 Regards,
 Chris


-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.


Posted By: allischalmerguy
Date Posted: 30 Mar 2018 at 10:34pm
Nice shop! Enjoy!


-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,


Posted By: Ted J
Date Posted: 31 Mar 2018 at 8:41am
Kenny, I was gonna say the same thing as Shameless!!  You got your new floor all dirty!  Who's gonna clean that up!?!?
Git that fridge installed, I'll be on my way over one of these days.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: victoryallis
Date Posted: 31 Mar 2018 at 11:35am
I’m envious of the a frame

-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760


Posted By: FloydKS
Date Posted: 31 Mar 2018 at 11:45am
You can not call that floor dirty...you can still see it.


-------------
Holding a grudge is like taking poison and expecting the other person to die


Posted By: Reindeer
Date Posted: 01 Apr 2018 at 8:43pm
That A frame looks pretty skookum.  Having a shop to work in is really great. Looks like you have lots of room. 

I have a frame like yours from Princess Auto (Harbour Freight) rated up to a ton .  I just used it to drop the front axle support and the bottom plate off the steering box so I could change the seal out on the bottom of the steering.   Worked good once I figured out how to keep the sector from falling out of the steering box while I was three handing all the other bits. Just put a wrench under the sector in the box, until I got the bottom plate and seal onto  the sector shaft.  Then I could just get my hand in and take the wrench out and the bottom plate kept the sector from tipping enough to escape. 

Back together and works fine, no leaks.  


-------------
                 


Posted By: Lonn
Date Posted: 02 Apr 2018 at 6:30am
Originally posted by FloydKS FloydKS wrote:

You can not call that floor dirty...you can still see it.
Floor has to get dirty enough so as it is lumpy. Keeps tool box from rolling away. Wink


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: Ted J
Date Posted: 02 Apr 2018 at 4:25pm
I spose when I come, I could bring the "C" with, seein as you have SO MUCH ROOM!!  Then you could pull the left rear and install new bearings and whatever else is needed and then I could come back towards the middle of summer and you'd have it all done and ready for road trips?!?!
Beats the heck out of working in the sand like I have to do.....


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: Kenny L.
Date Posted: 02 Apr 2018 at 7:31pm
Ted sorry but I will not have any time to work on my own stuff little lone anyone else stuff,  I'm going back to work one of these day I told them I would do a couple of days in the lab but they ask if I work come back and work during the busy season so I'll be working most of the summer as a part time seasonal worker which mean no benefits but that is ok with me. I'm going to try it is year and see if I like it or not.  


Posted By: Ted J
Date Posted: 03 Apr 2018 at 5:53am
Cry Cry Cry Now I'll have to make a reservation with you to come over.  Of course, if I'm a little early, I suppose I could bring my own beer and my swimming trunks and wait for you at pool side. LOL

WHAT THE ELLS THE MATTER with you?!?!?  Goin back to work?  Well, I suppose you have to pay for that new shed some way...  They'd have to pay me DEARLY to come back to work.. Well at least I hope it is fun for you and not a job!


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net