620 parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147534
Printed Date: 16 May 2024 at 9:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 620 parts
Posted By: MB1974
Subject: 620 parts
Date Posted: 14 Feb 2018 at 7:24pm
|
Need parts for my Allis 620 can anyone help me out or point me in the rite direction I am new at this thanks
|
Replies:
Posted By: allisorange
Date Posted: 14 Feb 2018 at 8:01pm
MIKE NOONAN ON THIS FORUM HAS PARTS.
JOHN CARLSON
|
Posted By: mnoonan-NEWI
Date Posted: 14 Feb 2018 at 10:04pm
|
Mark, what parts do you need? I may be able to help.
You can email me at mnoonan42@ gmail.com or call me at 715-701-1138.
Thanks John. Where do I send your commissionl check to? Ha!
-------------
AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8
|
Posted By: MB1974
Date Posted: 15 Feb 2018 at 6:47am
|
I got the part name and numbers off Michaelstractors.com Part 23)pulley clutch24)bearing 25)spacer32)armpivot 33)washer34shaft pivot arm Or 23-34 what ever is easier thanks
|
Posted By: MB1974
Date Posted: 15 Feb 2018 at 8:34am
|
On page 1-22 fig 26 sorry I am a newbie thanks agiain
|
Posted By: macvette
Date Posted: 15 Feb 2018 at 8:04pm
|
MB1974 - Welcome to the forum!
Just keep asking questions. Lots of folks on here who have a lot of knowledge of these fantastic beasts.
|
Posted By: ac720nut
Date Posted: 16 Feb 2018 at 7:25am
Posted By: Steve in NJ
Date Posted: 04 Mar 2018 at 10:55am
|
If Mike doesn't have all the parts yer' lookin' for, I maybe able to help ya out. mailto:Steve@B&B" rel="nofollow - Steve@B&B mailto:customcircuits@gmail.com" rel="nofollow - customcircuits@gmail.com
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: Jim NEIN
Date Posted: 06 Apr 2018 at 4:02pm
|
Are parts for the front electric clutch available? Mine was slipping last fall.Thanks,Jim
|
Posted By: mnoonan-NEWI
Date Posted: 06 Apr 2018 at 8:08pm
|
Jim, did you try adjusting the gap between magnet plates? It should be about 0.010. Mike
-------------
AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8
|
Posted By: Jim NEIN
Date Posted: 07 Apr 2018 at 8:31pm
|
No I didn't thanks for the info.
|
|