Farm Equipment - Ca hold position.

Print Page | Close Window

Ca hold position.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=146936
Printed Date: 05 Nov 2025 at 5:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Ca hold position.

Posted By: Nathanb
Subject: Ca hold position.
Date Posted: 28 Jan 2018 at 9:45am

I have an ca tractor that will lift the lift arms when hold positions lever is in down position and the lift arms will not drop anyway I move the valve. I disassembled the hold position valve body, but having trouble getting the plunger out of the valve body. Everything else is removed, detent ball and spring, position shaft, screw, spring and ball are all out. I feel as though this plunger is froze in. Any ideas how to get this unfroze and out?? Much appreciated!!
Nate

Replies:

Posted By: PaulB
Date Posted: 28 Jan 2018 at 10:54am

Sandy Lake is very good at rebuilding those valves.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY