Rc ring and pinion in a wf
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=145720
Printed Date: 23 Nov 2024 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rc ring and pinion in a wf
Posted By: Matt -mid-mich
Subject: Rc ring and pinion in a wf
Date Posted: 21 Dec 2017 at 8:51pm
|
Pros and cons to putting rc ring and pinion in a wf I understand I need to machine another bearing on the pinion and best to use the wf carrier any input would be great tractor is just to fast for the 3mph speed limit rules running 10%over Rpms with d17 m code engine at 65 hp at pto ------------- We have 86400 seconds to everyday make every second count because we never know when it's our last |
Replies:
Posted By: CAL(KS)
Date Posted: 22 Dec 2017 at 9:32am
pinion has place for bearing, just not installed on rc. what size tires are you running? what rules are used? natpa? ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: Matt -mid-mich
Date Posted: 22 Dec 2017 at 3:09pm
|
Running a set of 14.9 28s top cut with a 18in draw bar weights can extend 11 ft forward from center of rear axle also run sometimes 16.9 24s top cut seem to do better with the 14.9s natpa rules ------------- We have 86400 seconds to everyday make every second count because we never know when it's our last |
Posted By: Ken(MI)
Date Posted: 23 Dec 2017 at 6:07am
| The rc pinion shafts were not ground to accept the bearing, just rough forged in that area, any decent machine shop should be able to finish grind it though. |