Farm Equipment - Hydraulic angle Allis blade

Print Page | Close Window

Hydraulic angle Allis blade

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144840
Printed Date: 27 Jul 2025 at 1:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hydraulic angle Allis blade

Posted By: BillinAlberta
Subject: Hydraulic angle Allis blade
Date Posted: 27 Nov 2017 at 9:58am

Has anyone cobbled a hydraulic angle adjuster for the oxnard blades?

Getting old and I would like to be able to adjust the blade from the tractor seat.

Replies:

Posted By: Reindeer
Date Posted: 27 Nov 2017 at 5:10pm

I have not done that on a Oxnard blade, but do have one set up on a modern 3 pt. blade. Got to admit it is very handy. Specially with cab, as it is a pita to get in and out as I get older.

-------------

Posted By: Dakota Dave
Date Posted: 27 Nov 2017 at 7:03pm

We have hydraulic angle and tilt on the John Deere blade at the farm. The angle shouldn't be that hard to do you jst need an anchor point on the boom for the ram and a belcrank welded to the blade for the other end. Take the lock assembly off and hook the ram up to your remotes. If your tractor only has single acting hydraulics your just dreaming. I've used the 12 foot John Deere blade on my 190 it works pretty good. But the tractor is a little small for it.

Posted By: DSeries4
Date Posted: 27 Nov 2017 at 9:15pm

It would be a good way to ruin the value of the original Oxnard blade. Without welding or other modifications they bring very good money. Doing something like this would destroy the value.
I would say sell it and get a blade which already has the functions you are looking for.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080