Farm Equipment - B side weights

Print Page | Close Window

B side weights

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144455
Printed Date: 05 Jun 2025 at 6:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: B side weights

Posted By: DaveWisc.
Subject: B side weights
Date Posted: 14 Nov 2017 at 3:30pm

Do the weights that bolt on the side of the engine have a spacer on the inside of the bolt or not. I am in the mode of buying weights and want to know how they are mounted. Thanks Dave

Replies:

Posted By: Hubnut
Date Posted: 14 Nov 2017 at 5:40pm

Dave,
I don't have my parts book handy, but there is a bolt that goes through the front engine plate. That bolt holds a fitting of larger diameter that the front of the weight slides into this. I've used a pipe if you can't find the fitting.
Steve

-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H

Posted By: Gary
Date Posted: 14 Nov 2017 at 6:09pm

Like hubnut says for the front: hex head bolt, lock washer, and spacer.

At the rear: hex head bolt and lockwasher.