Garden Tractors - Allis 720 / Simplicity 9020

Print Page | Close Window

Allis 720 / Simplicity 9020

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144431
Printed Date: 19 Nov 2024 at 1:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 720 / Simplicity 9020

Posted By: rustydollar
Subject: Allis 720 / Simplicity 9020
Date Posted: 13 Nov 2017 at 5:06pm

Deleted by author

Replies:

Posted By: IBWD MIke
Date Posted: 14 Nov 2017 at 12:15pm

And just the coolest looking garden tractor ever built!

Posted By: AC720Man
Date Posted: 14 Nov 2017 at 12:58pm

Built like a tank! I have 2-720's and they do so much from a small machine. How many other 19hp gas garden tractors weigh 1,300 lbs alone? Heavy built

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: rustydollar
Date Posted: 14 Nov 2017 at 2:32pm

Deleted by author

Posted By: talntedmrgreen
Date Posted: 16 Nov 2017 at 1:30pm

I'm havin' fun with mine Tongue

Pickin up a couple more on Monday!

https://www.youtube.com/watch?v=58CMzaNNFTc&t=31s

https://www.youtube.com/watch?v=vRnT3XGXfd0&t=269s

-------------
Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494

Posted By: HudCo
Date Posted: 16 Nov 2017 at 6:30pm

the only thing i would like to have on mine is a 540 reduction box . but some of the kubotas use the 2000rpm spline set up

Posted By: talntedmrgreen
Date Posted: 17 Nov 2017 at 9:56am

HudCo wrote:

the only thing i would like to have on mine is a 540 reduction box . but some of the kubotas use the 2000rpm spline set up

There have been a couple pop up lately, pretty reasonably, and bought one. I saw a couple in the higher price range earlier in the year on ebay.

Surprisingly, they fit the tractor fine without removing any of the 3 point components, like I had always heard was necessary. However, if a guy wanted to try and run a 3 pt implement, it would require much longer arms.