Farm Equipment - CA traction booster

Print Page | Close Window

CA traction booster

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143812
Printed Date: 07 Sep 2025 at 1:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA traction booster

Posted By: kenbob
Subject: CA traction booster
Date Posted: 25 Oct 2017 at 8:14pm

I am trying to set the traction booster on the CA I just bought. The big spring was slack, so I got that set. I cannot get the locknuts loose on that shaft that runs back to the pump on the upside of the hitch bracket. If I could get it off, I could get it on a vice. I thought if I took the screw out at the end, I could just pull the whole thing out. The shop manual only shows a spring on the shaft down side of the bracket, but it does not want to budge when I try to pull the whole thing out. It turns in the bracket so it isn't rusted in or anything. The shop manual I have is a little short on detail, I think.

Replies:

Posted By: kenbob
Date Posted: 27 Oct 2017 at 9:15pm

I found that pin and got it apart.