#7 SickleMower/CA Mounting Bracket
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140951
Printed Date: 03 Nov 2025 at 11:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: #7 SickleMower/CA Mounting Bracket
Posted By: Cernunnos
Subject: #7 SickleMower/CA Mounting Bracket
Date Posted: 30 Jul 2017 at 10:12pm
|
Hello, Could someone please tell me the bolt size/length that attaches the balance spring linkage to the final drive housing? I am going to attempt to attach the mower to my CA for the first time tomorrow. Should be a learning experience. Thanks very much
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Replies:
Posted By: Gary
Date Posted: 31 Jul 2017 at 3:18am
Do you have one of these Manuals ?
Gary
http://www.ebay.ca/itm/Allis-Chalmers-No-7-Power-Mower-Operators-Manual-D-17-WD-/152547639212?hash=item23848c3fac:g:nIYAAOSwlndZF4Iw" rel="nofollow - http://www.ebay.ca/itm/Allis-Chalmers-No-7-Power-Mower-Operators-Manual-D-17-WD-/152547639212?hash=item23848c3fac:g:nIYAAOSwlndZF4Iw
|
Posted By: Cernunnos
Date Posted: 31 Jul 2017 at 6:48am
Yes, I have those operating instructions and the dealer parts catalog which shows the blow-up diagrams of the parts but it does not mention the actual bolt sizes. It does give a part number of 913065 (bolt) but I don't have that cross reference. Maybe someone else does?
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Posted By: mnoonan-NEWI
Date Posted: 31 Jul 2017 at 1:42pm
Part number 913065 is a 1/2" x 3-3/4" Hex head machine bolt w/ hex nut
-------------
AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8
|
Posted By: Cernunnos
Date Posted: 31 Jul 2017 at 1:54pm
Excellent..thanks Mike!
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Posted By: Ted J
Date Posted: 31 Jul 2017 at 5:36pm
Bob, you're probably going to have to buy a 4" bolt and cut off a 1/4". I've had to do that often with these old machines. Back then things were simple and everything came in 1/4" increments. Now it's 1/2"...... Also back then though was that the bolts were 13/16" and the nuts were 3/4" Go figure.....
-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
|