Farm Equipment - 1948 WD rear wheels

Print Page | Close Window

1948 WD rear wheels

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139349
Printed Date: 19 Aug 2025 at 10:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1948 WD rear wheels

Posted By: Lew
Subject: 1948 WD rear wheels
Date Posted: 12 Jun 2017 at 11:14am

I am looking for a rear spin out rim or standard rim for my just purchased 1948 Allis WD tractor around the Atlanta GA area,

Replies:

Posted By: JimD
Date Posted: 12 Jun 2017 at 12:41pm

Here ya go!

http://oktractor.com/zen/index.php?main_page=product_info&cPath=1_15_220&products_id=354" rel="nofollow - http://oktractor.com/zen/index.php?main_page=product_info&cPath=1_15_220&products_id=354

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: Driverdan
Date Posted: 12 Jun 2017 at 2:10pm

I just purchased a spin out wheel (in the above Link) for my WD45. Price and shipping were reasonable, and quality was great. Very satisfied with OKTractor. Hope that helps... Dan

Posted By: Hubert (Ga)engine7
Date Posted: 12 Jun 2017 at 3:04pm

Congratulations on getting a WD, one of my favorites and welcome to the Forum. How close are you to exit 8 on 985?OK Tractor has quality products and reasonable prices. Plus they support this Forum. And are you looking for new or used?

-------------
Just an old country boy saved by the grace of God.

Posted By: Lew
Date Posted: 12 Jun 2017 at 4:36pm

thanks for input

Posted By: Lew
Date Posted: 12 Jun 2017 at 4:48pm

Not sure what exit is 8, I am at 4 I believe 8 is Friendship road. Used would be great. The rim on the tractor is rusted out and we need one to get it loaded. Also the tractor has been setting for several years with a two row mounted cultivator and the tires are spread out and the tractor doesn't run but not locked up. The other issue I have is getting the tires in so it will fit on a trailer it is in northern TN near.

Posted By: Lew
Date Posted: 12 Jun 2017 at 4:49pm

Thank you

Posted By: marion
Date Posted: 13 Jun 2017 at 4:55am

think I got a good one in central ar with tire mounted on it. If your wheel locks are froze up as most are, you can load it with back wheels off. Have done it before just not fun

Posted By: corbinstein
Date Posted: 13 Jun 2017 at 6:31am

it can be loaded with flat tires, but much harder with the brakes stuck.

Posted By: Ted J
Date Posted: 13 Jun 2017 at 6:37am

Lew, you should post this in the "Classifieds" section. You're more apt to find an used one from over there.
I don't have any good ones, and I am TOO FAR away to help anyway.

-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17

Posted By: corbinstein
Date Posted: 13 Jun 2017 at 6:53am

come to think of it, I loaded a D14 with rusted out rear on one side.

I ended up dragging it, then backing the trailer up to it, then backing the trailer under the front after jacking it up high enough. then just dragging the rears up.

only way I could do it. a good rolling jack on top the the trailer will help some.

I have a roller wheel from a d14 if you need it, and a couple combine wheels.