D14 HITCH
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138890
Printed Date: 08 Oct 2025 at 4:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 HITCH
Posted By: HVFDFIREFIGHTER
Subject: D14 HITCH
Date Posted: 29 May 2017 at 6:57pm
I think I put it back together. Does this look right? Feels pretty flimsy. What is the bar going to the right? It almost touches the back tire (maybe 2" away). What does the thicker bar with thinner bars coming out on both sides for (sorry for the technical terms)? The second picture, you can see how the pin is at an angle. The whole unit is kinda lose. Is it supposed to be like that? There is also a bell coupling under the tractor. I have it put back together. There is a lever that goes through the right floorboard that pulls a chain to pull a pin to release the draw bar.     |
Replies:
Posted By: Don(MO)
Date Posted: 29 May 2017 at 7:17pm
|
You have brackets on the D14 to mount an 80-S mower on the tractor, you don't need the mower mounting bracket on there if you are not mounting the 80-S mower on the tractor.
------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |