oil pick up screen
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13776
Printed Date: 24 Nov 2024 at 2:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: oil pick up screen
Posted By: Rob G.
Subject: oil pick up screen
Date Posted: 12 Jun 2010 at 6:52pm
| Any body know were I can get a oil pump pick-up screen for a allis chalmers B? Thanks |
Replies:
Posted By: CTuckerNWIL
Date Posted: 12 Jun 2010 at 7:06pm
|
Ya used to be able to buy screen like that at farm and fleet, used to screen sprayer tanks pumps. Take a sample of the old one to NAPA or some such place.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Rob G.
Date Posted: 12 Jun 2010 at 7:15pm
| Thats a problem. there was not one in it when i took the oil pan off. The part that the screen goes into was there however. |
Posted By: eireog68
Date Posted: 14 Jun 2024 at 9:40pm
|
any one know where i can get a inlet straner screen for an alice chalmers one sixty Thank you to all that replied i got one from agco parts at a steep price $104 with shipping but with the price of hydraulic it is worth the investment now i just have to find a shift boot that will fit to keep the water out.
|
Posted By: Dirt Farmer
Date Posted: 15 Jun 2024 at 2:04am
| I needed a screen like you are doing and ended up getting a vegetable strainer thing in the cooking isle at Wmart that was the right diameter and stainless steel. The old one just had wire to secure it so I cut the size I needed and wired it to the base. |
Posted By: WF owner
Date Posted: 15 Jun 2024 at 6:03am
Have you tried an AGCO dealer? I believe the engine used in an Allis Chalmers 160 was the same model Perkins engine used in a Massey Ferguson 135.
|
eireog68 wrote:Posted By: PaulB
Date Posted: 15 Jun 2024 at 6:50am
Take it to NAPA. Now that's a good laugh to start the day. The only place less likely to have whatever it is that you're looking for would be TSC. The new stuff that those places have parts for must really break down enough to keep them in business, because they don't carry anything to fit much that is even 20 years old, let alone 70+. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Fred in Pa
Date Posted: 16 Jun 2024 at 6:22am
|
Now we know it's not a engine oil pick up tube screen , That $104. is the cost of the life time of tractor and you. Just keep it cleaned . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |