Farm Equipment - WD Synchro Trans problems

Print Page | Close Window

WD Synchro Trans problems

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137515
Printed Date: 24 Aug 2025 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Synchro Trans problems

Posted By: macvette
Subject: WD Synchro Trans problems
Date Posted: 18 Apr 2017 at 3:39pm

Please help. Nathan and Charlie Tucker told me how to get tower off (2nd and tilt right). Got tower pivot pins back out of transmission, now for a couple weeks, trying to get tower back in correctly. LittleMarv even drove an hour to my house to help, but even he was unable to solve problem. Can only shift to neutral and reverse. Pulled tower again and took a couple pix,but can't seem to get them to load.

Looks like we have shifter in 2nd in tower before putting together.

Complete flummoxed. Went into all gears prior to taking shifter out to add some size so didn't slide thru and get stuck in 2 gears. Now ball slides thru neutral gate, and into each side ok.

Thanks.

Replies:

Posted By: MACK
Date Posted: 18 Apr 2017 at 10:46pm

Try natural. 190, yes take it off and on in 2 nd, but WD45, use natural. MACK

Posted By: macvette
Date Posted: 19 Apr 2017 at 8:38pm

Thanks, Mack. Put it in neutral, and finally got tower back on. Now will have to weld and grind some more on shifter ball to make it shift correctly, and not slip and lock into 2 gears.