Construction and other equipment

Print Page | Close Window

655 crawler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136029
Printed Date: 03 Nov 2025 at 10:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 655 crawler

Posted By: Calvin Schmidt
Subject: 655 crawler
Date Posted: 09 Mar 2017 at 7:27pm

Had a call today from someone looking for steering clutch discs for a 655. Not available from dealer. Not listed at Minnpar. Where can a person get some?

-------------
Nothing is impossible if it is properly financed

Replies:

Posted By: truckerfarmer
Date Posted: 09 Mar 2017 at 9:17pm

Try General Gear.

-------------
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer

Duct tape.... Can't fix stupidity. But will muffle the sound of it!

Posted By: Randaleky
Date Posted: 09 Mar 2017 at 10:40pm

I order mine bi-metallic disc, and brake bands from them for my hd4 allis dozer. call 208-342-8911 Boise, Idaho

Posted By: orangeman
Date Posted: 11 Mar 2017 at 5:39am

Yes, General Gear in Boise - believe 655 uses same as H3 and HD4 series.

Posted By: Dozer
Date Posted: 11 Mar 2017 at 7:38am

$23.99 on eBay

Posted By: Coke-in-MN
Date Posted: 11 Mar 2017 at 11:41am

Odd as my HD4 used a single disc like automotive clutch disc and a Auburn type pressure plate

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: Randaleky
Date Posted: 11 Mar 2017 at 11:57am

That is the first time I have heard of that Coke. Someone must have invented / rigged a new system on yours. Did the system work good ? Any above normal slipping ?

Posted By: orangeman
Date Posted: 11 Mar 2017 at 12:12pm

Coke: Is your post in reference to the engine clutch or the steering clutch? Manual for the HD4 shows a torque converter flex plate set up for transmitting power to the shuttle clutch transmission.

Steer clutches and pressure plate set up in HD4 very similar to the H3 series crawlers if not the same.