Pulling Forum - Tips for 16HP Kohler Build

Print Page | Close Window

Tips for 16HP Kohler Build

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135424
Printed Date: 24 Nov 2024 at 7:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Tips for 16HP Kohler Build

Posted By: KevinON
Subject: Tips for 16HP Kohler Build
Date Posted: 23 Feb 2017 at 5:59pm

I am rebuilding a 16HP Kohler K341 for my 716 Six Speed for stock altered pulling. I can go to .060 overbore. Any tips for rebuilding this puppy to get the most out of it? Better cam? Thanks for the advice!

Replies:

Posted By: Coke-in-MN
Date Posted: 23 Feb 2017 at 6:51pm

Unsure of rebuilding that far over - but if you need a couple more engines I have 2 that I would sell -
I rebuilt 1 to 20 over with new crank - other was rebuilt stock bore but the balance gear broke and broke the dipper on the rod
Ended up replacing the engines with a Honda V - 18 Hp in my New Holland S16

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: DrAllis
Date Posted: 25 Feb 2017 at 8:48am

I'm imagining shaving about 1/8" off of the head to raise the compression, or adding to piston height would be better yet.

Posted By: HudCo
Date Posted: 25 Feb 2017 at 9:37am

midwest supercub has lots of high performance k motor parts ( internals that will stay together) or brian millers a1 machine is also a good sourse o knowlage on kohler puller engines