cable control for gresen hydraulic valve
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134536
Printed Date: 06 Jun 2025 at 10:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: cable control for gresen hydraulic valve
Posted By: darrel in ND
Subject: cable control for gresen hydraulic valve
Date Posted: 01 Feb 2017 at 12:27pm
|
When I get around to putting the cab on our 185, I'm going to need a joystick/cable control kit to operate the loader. Right now it is a one piece, three spool Gresen valve stack, with 3 levers attached to it, and I don't want that mounted in the cab with all of them hydraulic hoses running in and out of the cab. Now I know I can get everything I need new, including a valve stack, but does anyone know if there is a joystick cable kit available that would be compatible with the Gresen valve, so I wouldn't have to buy that new also? Thanks, Darrel
|
Replies:
Posted By: jiminnd
Date Posted: 01 Feb 2017 at 2:24pm
Would think any hydraulic shop should have something. We had a kit on our 806 with loader, but got it with the loader.
-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
Posted By: Gerald J.
Date Posted: 01 Feb 2017 at 7:17pm
Baum Hydraulics http://www.baumhydraulics.com" rel="nofollow - http://www.baumhydraulics.com has some joystick kits in my catalog and some control cables too. I didn't detect that the joystick kits could work through cables, seemed only attached directly to valves. I acquired a Long 1099 back hoe years ago with a bad valve that had a joy stick and I converted it to individual levers which I liked better.
Gerald J.
|
|