b212 with stack/muffler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134179
Printed Date: 26 Jun 2024 at 1:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: b212 with stack/muffler
Posted By: NATHAN CAIRNS
Subject: b212 with stack/muffler
Date Posted: 23 Jan 2017 at 8:08pm
i want to put a muffler and a rain cap on my b212  ------------- B212, WD45, B, 912 Hydro |
Replies:
Posted By: macvette
Date Posted: 23 Jan 2017 at 10:03pm
| Boy, does that B112 look cool! |
Posted By: truckerfarmer
Date Posted: 24 Jan 2017 at 6:30am
|
I did the same thing to a MTD 960 with a 14hp Briggs. As I recall, it was 3/4" pipe. Seems like the muffler was for an 'A' Farmall. I just went to the tractor muffler section at the local Runnings and went through their selection til I found one with the right inlet to fit the pipe. ------------- Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
Posted By: NATHAN CAIRNS
Date Posted: 20 Feb 2017 at 8:12pm
|
oh cool i dont have a Runnings where i live but i wish i did because farm and home doesnt have a very big exhaust section (illinois) ------------- B212, WD45, B, 912 Hydro |
Posted By: ac720nut
Date Posted: 21 Feb 2017 at 10:22am
| Check with Tractor supply store here in Ann Arbor has a selection of mufflers. I think your going to find it to be 1- 1.5 in pipe though Just my $.02 |
Posted By: farmtoybuilder
Date Posted: 21 Feb 2017 at 1:27pm
|
1" pipe threads in block. And you can add a elbow and larger diameter pipe sized to muffler you get. ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: NATHAN CAIRNS
Date Posted: 21 Feb 2017 at 6:25pm
|
ok thanks i have a tsc here where i live ill check there i have the briggs engine like the 112 in the picture so i think its the same sized hole idk for sure ------------- B212, WD45, B, 912 Hydro |
Posted By: ACmowerguy
Date Posted: 21 Feb 2017 at 6:41pm
|
You need to add some sort of brace to support the extra weight/leverage of that stack. If not it can over time damage the threads in the engine block. ------------- 10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments |
Posted By: NATHAN CAIRNS
Date Posted: 22 Feb 2017 at 9:25am
|
ok do you think I can come over from the chrome piece on the front where there is a predrilled hole (probably for headlights) with a piece of steel welded to a hose clamp? and if not where would you mount the support?
------------- B212, WD45, B, 912 Hydro |
Posted By: farmtoybuilder
Date Posted: 22 Feb 2017 at 1:07pm
|
Yes that would work. We don't have any on ours, but it doesn't get run much. ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: tadams(OH)
Date Posted: 22 Feb 2017 at 2:18pm
| I have been running mine without a brace for years and no problem |
Posted By: NATHAN CAIRNS
Date Posted: 23 Feb 2017 at 7:30pm
|
ok thanks ill still probably put a brace on it. i seen on youtube where a guy made his from galvanized pipe, is that a good idea? oh and what is the thread size where it goes in the block ------------- B212, WD45, B, 912 Hydro |
Posted By: farmtoybuilder
Date Posted: 24 Feb 2017 at 8:46am
|
1" pipe threads in block ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: talntedmrgreen
Date Posted: 24 Feb 2017 at 3:10pm
|
Most guys run a support over from one or two of the head bolts. Our TSC has piles of them here. I'm not a fan and always yank them off tractors I buy and try to get folks to take them when they visit ------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494 |
Posted By: NATHAN CAIRNS
Date Posted: 25 Feb 2017 at 6:29pm
|
thanks im going to see if i can get pipe sometime this week ------------- B212, WD45, B, 912 Hydro |