Farm Equipment - 7040 hydrolics help needed

Print Page | Close Window

7040 hydrolics help needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13348
Printed Date: 01 Feb 2025 at 11:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7040 hydrolics help needed

Posted By: nickia
Subject: 7040 hydrolics help needed
Date Posted: 03 Jun 2010 at 9:13pm

any one know which direction the check valve goes in the rear tub im talking about the check valve that feeds the pump from the diffentral filters and and goes up to the pump? there is a two hole flange that has a flat shim/washer behind it then a rubber gromet behind it when compressed it seals around the tube to make a seal but between the pipe and housing there's a check valve stainless steel and plastic the stainless piece has two tangs do those tangs face the pump or the rear tub? thanks

Replies:

Posted By: Lynn Marshall
Date Posted: 04 Jun 2010 at 7:08am

Check the Agco Parts website for a clear view of those parts. Hydraulic section-differential filter group.